Author: admin

And I learned something new again. I needed 7-segment displays for my MCP. A 5-digit PCB was difficult to obtain. So I decided to see if I could make one myself. I started working with the EasyEDA program. And that turned out surprisingly well. So I also immediately developed...

Last month I’ve been working mainly on my latest new project: the MCP. When I started building my cockpit (almost 20 years ago), it was my first project. Back then, it was made entirely from wood and electronics components I could find here and there. While it resembled the...

Now that the overhead panel is almost finished (not all panels are online yet, but will be as soon as possible), it was time to start the next project. The compass under the overhead, makes the overhead completely finished. However, I had never worked with a stepper before. So...

Finally I found some time to update my website. I have put a number of panels from my overhead on the site for download. The download files have changed a bit. To save some web space on the server, I only put a zip with the STL files on...

I have redesigned the steering tiller for use with the mechanism of the 737 tiller of 737diysim.com. You will buy this last one to use my 767 tiller....

Haven’t worked on the site for a long time. This doesn’t mean I’ve been sitting still. Over the past year I’ve been working hard on the overhead project that is now completely finished. I’ll be uploading the files soon....

After enjoying the summer days outside and a wonderful holiday in Slovakia, I started the overhead project again. The 3 left columns were already finished. Now starting with column four. The first part is the Cargo heating panel. This is now ready for download....

Don’t panic, I haven’t stopped this project. I took a few weeks off for a wonderful holiday in the south of France. The winter is now over and the nice weather lures me outside more often. So the hours in my attic room are getting less. So there will...

Finally the IRS panel is ready to download. I ordered the display and the adapter through Ebay. Then tested with Mobiflight. Then look for the right buttons. Finally found after a long search. The image does not show all the correct buttons, but the STL file contains the correct...

Again an update of my overhead project in Fuision 360...